|
Richards
Solving The Richards equation with temporally periodic surface boundary conditions
|
container struct for all the settings variables needed for a BousThermModel run More...
#include <settings.h>
Public Attributes | |
| double | depth |
| domain depth (m) | |
| double | delz0 |
| surface cell width (m) | |
| double | delzfrac |
| fraction increase for deeper neighbor cell | |
| double | delzmax |
| maximum cell width (m) | |
| bool | save_grid |
| whether to write grid files | |
| double | tint |
| duration of solve | |
| double | tunit |
| time unit to use (number of seconds) | |
| long | nsnap |
| number of snaps to take | |
| long | nmaxout |
| maximum length of output vectors (subsampled to accomodate) | |
| double | dtfac |
| safety factor for stable time step | |
| double | poro |
| porosity | |
| double | perm |
| permeability (m^2) | |
| double | g |
| gravity (m/s^2) | |
| double | mu |
| water viscosity (Pa*s) | |
| double | rho |
| water density (kg/m^3) | |
| double | b |
| Brooks-Corey parameter. | |
| double | wilt |
| wilting saturation as fraction of porosity | |
| double | tauevap |
| evaporation timescale | |
| double | Levap |
| evaporation depth | |
| double | infper |
| infiltration period (s) | |
| double | infdur |
| infiltration duration (s) | |
| bool | poroc |
| whether to write porosity at cell centers | |
| bool | poroe |
| whether to write porosity at cell edges | |
| bool | Ksat |
| whether to write saturated hydraulic conductivity | |
| bool | psisat |
| whether to write saturated matric head | |
| bool | dpsidw |
| whether to write dpsidw when snapping | |
| bool | dwdz |
| whether to write moisture fraction derivative when snapping | |
| bool | K |
| whether to write hydraulic conductivity when snapping | |
| bool | D |
| whether to write diffusivity when snapping | |
| bool | w |
| whether to water fraction profile when snapping | |
| bool | we |
| whether to write water fraction at cell edges when snapping | |
| bool | wall |
| whether to track all water fractions | |
| bool | q |
| whether to write water flux when snapping | |
| bool | qtop |
| whether to track top flux | |
| bool | qmid |
| whether to track middle flux | |
| bool | qbot |
| whether to track bottom flux | |
| bool | qall |
| whether to track all fluxes | |
| bool | infil |
| whether to track infiltration flag | |
| bool | t |
| whether to track step times | |
| bool | tsnap |
| whether to track snap times | |
container struct for all the settings variables needed for a BousThermModel run
Definition at line 13 of file settings.h.